Page 4 of 5
J Back
Cushion
1
K Toss
Pillow
1
Assembly Steps:
Step1: Attach right arm (B) to back frame (A) with M6x20mm hex head bolts (E), M6 washers (F).
Repeat the same procedure on the left arm (C). Do not fully tighten at this step. (See Figure 1)
Figure 1
Step2: Attach seat frame (D) to right arm (B) and left arm (C) with M6x20mm hex head bolts (E),
M6 Washers (F). (See Figure 2)
Figure 2
