Elster GmbH, Geschäftssegment LBE
Postfach 22 03 27, D-42373 Wuppertal
Schwelmer Straße 185, D-42389 Wuppertal
T +49 202 60908-0
F +49 202 60908-20
GB-16
D
GB
F
NL
I
E
Contact
If you have any technical questions, please contact
your local branch office/agent. The addresses are
available on the Internet or from Elster GmbH.
We reserve the right to make technical modifications
in the interests of progress.
info@kromschroeder.com, www.kromschroeder.com
Logistics
Transport
Protect the unit from external forces (blows, shocks,
vibration). On receipt of the product, check that the
delivery is complete, see page 2 (Part designa-
tions). Report any transport damage immediately.
Storage
Store the product in a dry and clean place.
Storage temperature: see page 15 (Technical data).
Storage time: 2 years before using for the first time.
If stored for longer than this, the overall service life
will be reduced accordingly (by the corresponding
amount of extra storage time).
Packaging
The packaging material is to be disposed of in ac-
cordance with local regulations.
Disposal
Components are to be disposed of separately in
accordance with local regulations.
Declaration of Incorporation
according to 2006/42/EC, Annex II, No. 1B
The product “Self recuperative burner for gas
ECOMAX
®
” is a partly completed machine pursuant
to Article 2g and is designed exclusively for instal-
lation in or assembly with another machine or other
equipment.
The following essential health and safety requirements
in accordance with Annex I of this Directive are ap-
plicable and have been fulfilled:
Annex I, Articles 1.1.3, 1.1.5, 1.3.2, 1.3.4, 1.5.2,
1.5.5, 1.5.7, 1.5.8, 1.7.4
The relevant technical documentation has been com-
piled in accordance with part B of Annex VII and will
be sent to the relevant national authorities on request
as a digital file.
The following (harmonized) standards have been
applied:
– EN 746-2:2010 – Industrial thermoprocessing
equipment; Safety requirements for combustion
and fuel handling systems
– EN ISO 12100:2010 – Safety of machinery –
General principles for design – Risk assessment
and risk reduction (ISO 12100:2010)
The partly completed machine may only be com-
missioned once it has been established that the
machine into which the product mentioned above
is to be incorporated complies with the provisions
of the Machinery Directive 2006/42/EC.
Elster GmbH
Certification
Eurasian Customs Union
The product Ecomax meets the technical specifica-
tions of the Eurasian Customs Union (the Russian
Federation, Belarus, Kazakhstan).
Conformity certified under Technical Regulations
TR CU 010/2011
Contact
Summary of Contents for ECOMAX 0
Page 17: ...GB 17 D GB ...
