9
3.4 Parameter query
Normally the LCDdisplay can show 8pagestotally. Pressing the query button
or
for
0.1-2seccan enter into the different pageswhich show all information, suchas input, battery,
output, load, software version, temperature, and etc. If alarms occur,the display will add one
more pageto show the alarm information.If the UPS hasfaults, the default displaywill turn to
the Fault code pageautomatically, the home pagewill show the fault or alarm information by
default. When UPS keepsnormal working,the homepagedefault display will show the output
voltage and frequency information.
Press
(right button) more than 2sec, LCDwill turn to the pollingmode. Every 2 secthe
shown displaywill turn pages.Press
longtime, LCDwill exit the polling mode.
LCDDisplay1: UPS input & output voltage
LCDDisplay2: UPS input & output frequency
LCDDisplay3: Battery voltage and capacity
LCDDisplay 4: Output voltage and output
active power
LCDDisplay 5: Output voltage and output
apparent power
LCDDisplay 6: Output voltage and load
percentage
LCDDisplay7: UPS systemsoftware version
LCDDisplay8: connected battery quantity
