8
4.2 Display
After the main unit is turned on, the display is on and indicates the real time speed:
Fig. 6
This interface indicates the real-time speed. Turn the adjustment knob to set the speed and press the
adjustment knob to start the instrument. The rotation speed can be changed by turning the adjustment knob
while the instrument is in operation. After setting, the interface automatically changes to real-time speed.
Press the “INT” key to stop the motor, with LED indicating “txxx” (xxx is the intermittent operation interval, to
be set within 1-999sec), as shown in the figure.
Fig. 7
Turning the adjustment knob can adjust the forward and reverse rotation interval time. The instrument only
rotates forward when the forward and reverse rotation interval time is 0.
After setting, by pressing the “INT” key, the interface changes to the real-time speed display.
When the heating bath is turned on, water mode is the default mode, the water mode indicator is on and the
interface is on, indicating the real-time temperature:
Fig. 8
Turn the temperature adjustment knob to set the target temperature of the heating bath. After setting, by
pressing the knob, the heating indicator is on and the heating process begins. In the heating process, the
target temperature can be changed by turning the knob. After setting, the interface automatically changes to
real-time temperature.
Press the knob for 3s to switch the heating mode, with the corresponding indicator being on.
