EH-25MP supports a maximum partition amount of
four (4) per HDD. EH-25MP supports a maximum disk
capacity of 128GB (32GB per partition x 4 partitions).
Connect EH-25MP to a PC
(Windows XP/ME/2000)
There is no need to install any driver before connecting
EH-25MP to a PC.
Use the supplied USB cable to connect EH-25MP to the
USB port of the PC.
Although PCs can provide a certain amount of power to
EH-25MP through the USB cable, it cannot be guaranteed
that the supplied power from the PC is good enough or stable
enough to make EH-25MP work properly.
Normally the USB port provides enough power to power
on EH-25MP. However, it depends on the USB port of your
PC. If your PC cannot power on EH-25MP, it is recommended
to connect the supplied AC power adapter to EH-25MP.
When EH-25MP is connected to PC, a new HDD volume
will be detected and shown on “My computer”.
Now the installation of EH-25MP has been successful. In
the next step, you can save any data, movie, music or photo
files to the HDD.
Connect to a PC (Windows 98/SE)
If the operating system of your PC is Windows 98/SE,
please don’t connect EH-25MP to a PC before the USB driver
is installed.
Insert the supplied “USB driver CD for Windows 98/SE”
to an optical drive and install the USB driver to Windows
98SE.
After the installation of the USB driver, use the supplied
USB cable to connect EH-25MP to the PC using the USB
port.
