Before going to the setup menu of EH-25MP to adjust
the video output properly, pressing the
TV-OUT
button is the best way to search for available video
outputs.
Once the main menu screen is properly shown on
the TV set, press the
SETUP
button to adjust the right
TV type (NTSC or PAL)
and v
ideo output (S-Video,
Composite/YCbCr, YPbPr, VGA)
If the TV still shows a blank screen after finishing
the above installation, be sure to set the TV to the
correct video input type (AV mode) and channel. Refer
to the TV manual for details.
If the TV is black and white, press TV-OUT
button to adjust the proper video output mode.
If the TV screen is distorted or flicking, press the
SETUP button and select the TV type to match your
TV system, NTSC or PAL.
Setup menu – EH-25MP
Before enjoying media playback on EH-25MP, it is
recommended to enter the setup menu to select proper
parameter settings for movie, music and photo playback
environment.
To enter the setup menu, you can either select SETUP from
the main menu or press the SETUP hotkey on the remote
control, to exit the setup menu, press the SETUP button again
anytime.