2
5. Installation of 3.5” Hard Disk Drive (HDD)
Cautions before starting the installation
We strongly recommend you read below cautions before
starting installation.
Please carefully read and follow instructions in this user’s
manual
●
Please use the supplied AC power adapter, all video/audio
cables and USB cable
when purchasing this product.
If you want to use the SATA hard drive, you must
remove
the
IDE cable at first
●
3.5” HDD is sold separately and installed by end user. Please
pay high attention not to damage the PCB inside Case and prevent
water from getting into Case during installation
●
Don’t touch by wet hands, it may cause electric shock
●
We strongly recommend you to backup existing data inside 3.5”
HDD to another safe area before starting installation. We are not
responsible for any data damage/loss during installation
●
Please do not power off while any movie, music or photo is being
played. Unexpected power-off action will cause data loss or a serious
system hang-up
●
If unformatted 3.5” HDD is
inserted
, PCs cannot detect it
as
3.5”HDD does not exist. Please make sure any 3.5”HDD is well
formatted
before installation
.
●
We strongly recommend to unplug the AC power adapter when
you don’t use for a long time
●
Regular backup is recommended to preserve and store your
valuable data.
●
It is normal that the surface becomes hot when using
the device
but do not cover anything over the device.
●
Before unplugging power you should
stop playing
first. Then use
the POWER or SATANDBY/ON button to enter standby mode (the
standby LED turns red). Do not unplug the power when playing. If the
player is disconnected suddenly during file transfer, it may cause data
loss and harm the hard disk.
●
The hard disk must be set as master, When the device is used
as a player, make sure that all partitions are primary (not extended).
The file system is recommended to use FAT32 (NTSF will be
