Network HDD Recorder User Manual
18
4.
Using the remote control or navigation buttons on the front panel of the
recorder, select the desired
Menu Language
from the submenu and press
.
5.
The
Time
menu is highlighted. Select
Manual
from the submenu. Enter the
date and time as directed then press
to confirm.
6.
The
Network
menu is highlighted. Select
DHCP IP
or
FIX IP
from the submenu to configure network settings. See Wired LAN
Setup on page 46 for more details.
If you do not want to configure network settings now,
select
Cancel
from the submenu to continue.
7.
Press
to confirm network
settings.
The
Main
menu
displays.
Using the standby mode
The recorder provides
Standby
mode to temporarily power down the unit.
During extended periods of inactivity, the recorder should be
unplugged from the power outlet.
To enter the
Standby
mode, perform the following steps:
1.
Press the
button on the remote control or front panel of the
recorder.
2.
The
Power LED
lights orange and the recorder enters the
Standby
mode.
The HDD fan continues to run for a few seconds in
Standby
mode.
To exit the
Standby
mode, perform the following steps:
1.
Press the
button on the remote control or front panel of the
recorder.
2.
The
Power LED
lights green and the startup splash screen displays.
3.
The
Main
OSD menu displays after a few seconds.
