LEAD PACK 14
(
LCG-B314IP)-User Manual
12
6.9
CHECK THE LIGHTING INFORMATION
1) Press the
【
ENTER
】
button in
【
INFO
】
menu, then enter to the checking the lighting information.
2)
【
SOFT
】
button is for software version information.
3)
【
POW
】
button is for the current information of power reduction.
4)
【
TEM
】
is the current temperature of lamp.
6.10
LIGHTING SETTING PARAMETER RESET
1) Press the
【
ENTER
】
button in
【
ST L
】
menu, then enter to the lighting setting parameter reset.
2) Press the
【
UP/DOWN
】
button to select
【
YES
】
.
3) Press the
【
ENTER
】
button to escape and save.
Illustrations
：
“ADDR” and “PROG” are not reset, the others reset to the underlined value of the word.
6.11
【
PROG
】
SELF-PROGRAMMING PARAMETER RESET
1) Press the
【
ENTER
】
button in
【
PR L
】
menu, then enter to the
【
PROG
】
self-programming parameter reset.
2) Press the
【
UP/DOWN
】
button to select
【
YES
】
.
3) Press the
【
ENTER
】
button to escape and save.
6.12
LIGHTING PARAMETER DOWNLOADING EACH OTHER VIA DMX
CABLE
1) Press the
【
ENTER
】
button in
【
SEND
】
menu, then enter to sending parameter to other lightings.
2) Press the
【
UP/DOWN
】
button to select
【
YES
】
.
3) Press the
【
ENTER
】
button to confirm sending.
Illustrations
：
1)Please disconnect the connection of projector and DMX console before sending the parameter.
2)The information of
【
ADDR
】、【
CAL
】
can’t be sent, can’t be downloaded each other.
3)There will be an automatic reset of the other projectors after receiving parameter correctly.
