3
lci1.com
Rev: 04.27.21
Lippert BottleCheck (AU)
Installation and Owner’s Manual
(For Aftermarket Applications)
CCD-0004234
NOTE:
Do this prior to using or servicing the propane
cylinder and/or gas appliances for the first time each
season and on a regular basis.
1.
Search for “Bottlecheck” to find the Lippert BottleCheck
application in the app store on an iOS or Android smart
device (
Fig.1
). Download the app to the smart device.
2.
The app uses Bluetooth on a smart device to pair with
the sensor. Upon opening the app, it typically will ask
about turning on Bluetooth or turning on Location setting
requirements unique to the phone/smart device to enable
pairing.
3.
To pair the app and the sensor via Bluetooth, have the
app open on the smart device. Press and hold the SYNC
button (
Fig. 2A
) until sensor appears on the app. This may
take up to 10 seconds.
NOTE:
The first time using the BottleCheck sensor may
require pressing the SYNC button 5 times in a row in order
to wake up the sensor.
Fig.2
A
Fig.1
Installation
NOTE:
Part numbers are shown for identification
purposes only.
NOTE:
Spacers are not typically required. See
troubleshooting section for guidelines.
Resources Required
•
Lippert BottleCheck app
• Cloth to wipe tank
PREVENT LPG LEAKS BY ALWAYS CLOSING THE
PROPANE CYLINDER VALVE, EVEN IF THE CYLINDER
IS EMPTY. NEVER STORE OR PLACE A PROPANE
CYLINDER IN AN AREA OF EXCESSIVE HEAT
(120 DEGREES OR HIGHER) OR NEAR A STOVE,
FIREPLACE, OR OTHER HEAT SOURCE. FLASH FIRES
OR EXPLOSIONS CAN RESULT FROM EXPOSING
PROPANE CYLINDERS TO HEAT.
Lippert BottleCheck Kit PN 2020135890
Lippert BottleCheck Kit PN 2020135890
Letter
Letter
PN
PN
Description
Description
Qty
Qty
A
2020329164
BottleCheck Tank Sensor
1
B
2021026924
BottleCheck Sonic Grease
1
2021026926
BottleCheck Tank Spacer Kit
1
Parts List
A
B
FOLLOW ALL LP CYLINDER SAFETY INSTRUCTIONS
AND INSTRUCTIONS FOR DISCONNECTING THE
CYLINDER FROM SERVICE. INSPECT THE PROPANE
CYLINDER AND GAS APPLIANCES FOR LEAKS.
