PARALLEL ARM (PUSH SIDE) MOUNTING
REGULAR or HOLD-OPEN arm mounting requires PA
SHOE, 4030-62PA for REGULAR or HOLD-OPEN
arms. Add prefix "P" to closer description (eg.
P4031). P4031 closer includes 4030-201 FIFTH HOLE
SPACER to support PA SHOE.
MAXIMUM OPENING
REGULAR or HOLD-OPEN arms can be templated for
180°.
EDA template allows 110° maximum opening.
Hold-open points up to maximum opening with
hold-open arm.
LCN
4030 SERIES
Butt Hinges
should not exceed 5” (127 mm) in
w i d t h .
Auxiliary Stop
is recommended at hold-open point
or where a door cannot swing maximum opening.
C l e a r a n c e
for 4030-62PA shoe is
4” (102 mm) from door face. E D A arm is
5 1/2” (140 mm) from door face.
Top Rail
less than 5“ (127 mm) measured from the
stop requires PLATE, 4030-18PA. Plate requires
1 3/4” (44 mm) minimum.
Stop Width
minimum 1” (25 mm).
Head Frame
flush or single rabetted requires PA
SHOE ADAPTER, 4030-419.
BLADE STOP
clearance, requires 1/2” (13 mm)
BLADE STOP SPACER, 4030-61.
Auxiliary Shoe
4030-62A allows installation of
regular arm with overhead holder/stop. Special
templating required.
EDA ARM
requires SHOE SUPPORT, 4030-30 for
fifth screw anchorage where reveal is less than
3 1/16” (78 mm).
Options
Hold-open, EDA, HEDA,
CUSH or HCUSH arm.
Special Templates
Customized installation templates
or products may be available to
solve unusual applications.
Contact LCN for assistance.
28
4030 EDA MOUNT
4030 PARALLEL ARM MOUNT
LCN CLOSERS
121 W. RAILROAD AVE.
P.O. BOX 100
PRINCETON, IL, USA 61356-0100
PHONE 800-526-2400
FAX 800-248-1460
www.lcn.ingersollrand.com
3/10
4030 closers ordered with EDA arms include 4030-201
FIFTH HOLE SPACER to support the shoe.