HINGE (PULL) SIDE
MOUNTING
MAXIMUM OPENING
Templating allows up to 120°.
Hold-open points 90° up to 120° with
hold-open arm.
LCN
4040 SERIES
Butt Hinges
should not exceed 5” (127 mm) in width.
Auxiliary Stop
is recommended at hold-open point or where a door
cannot swing beyond 120°.
Reveal
should not exceed 3/4” (19 mm) for regular arm or hold-open arm.
Top Rail
less than 3 3/4” (95 mm) requires PLATE, 4040-18.
Plate requires 2” (51 mm) minimum.
Clearance
of 2 3/8” (60 mm) behind door required for 90° installation.
Delayed Action
(not available on 4040XP) Add suffix “DEL” to selected
cylinder (eg. 4041 DEL). Delays closing from 120° to 70°.
Delay time adjustable up to approximately 1 minute.
Options
4040XP cylinder
4041 Delayed action cylinder.
Hold-open arm.
Metal cover.
Special Templates
Customized installation templates
or products may be available to
solve unusual applications.
Contact LCN for assistance.
41
LCN CLOSERS
121 W. RAILROAD AVE.
P.O. BOX 100
PRINCETON, IL, USA 61356-0100
PHONE 800-526-2400
FAX 800-248-1460
www.lcn.ingersollrand.com
3/10