LCN
4040 SERIES
PARALLEL ARM (PUSH SIDE)
MOUNTING
Optional mounting requires PA SHOE,
4040-62PA for REGULAR or HOLD-
OPEN arms. Add prefix "P" to closer
description (eg. P4041). P4041 closer
includes 4040-201 FIFTH HOLE
SPACER to support PA SHOE.
MAXIMUM OPENING
180° opening/hold-open points with
all except CUSH arms.
110° opening/hold-open with CUSH
arms.
Butt Hinges
should not exceed 5” (127 mm) in width.
Auxiliary Stop
is recommended at hold-open point, where the door cannot
swing 180°, or where CUSH-N-STOP arm is not used.
Clearance
for 4040-62PA shoe is 4” (102 mm) from door face.
EDA shoe projects 5 1/2” (140 mm) from door face.
CUSH shoe projects 6” (152 mm) from door face.
Top Rail
less than 5 3/8” (137 mm) measured from the stop requires PLATE,
4040-18PA. Plate requires 2” (51 mm) minimum from the stop.
Head Frame
flush or rabetted requires PA SHOE ADAPTER, 4040-419.
Stop Width
minimum 1” (25 mm).
Blade Stop
clearance requires 1/2" (13mm) BLADE STOP SPACER, 4040-61.
Delayed Action
(not available on 4040XP) Add suffix “DEL” to selected
cylinder (eg. P4041 DEL). Delays time adjustable up to approximately 1
minute.
Options
4040XP cylinder
4041Delayed action cylinder.
Hold-open, EDA, HEDA,
CUSH, HCUSH, SPRING
CUSH, or SPRING HCUSH arm.
Metal cover.
Special Templates
Customized installation templates
or products may be available to
solve unusual applications. Contact
LCN for assistance.
43
LCN CLOSERS
121 W. RAILROAD AVE.
P.O. BOX 100
PRINCETON, IL, USA 61356-0100
PHONE 800-526-2400
FAX 800-248-1460
www.lcn.ingersollrand.com
3/10