PARALLEL ARM (PUSH SIDE)
MOUNTING
MAXIMUM OPENING
EDA or Fusible Link arm can be
templated for
100°,
A = 5 15/16” (151 mm)
B = 7 1/4” (184 mm)
140°,
A = 4 7/16” (113 mm)
B = 5 3/4” (146 mm)
or 180°.
A = 2 15/16” (75 mm)
B = 4 1/4” (108 mm)
Hold-open points up to maximum
opening with HEDA or Fusible Link arm.
CUSH arm can be templated for
maximum opening at
85°,
A = 8 5/16” (211 mm)
B = 9 5/8” (244 mm)
90°,
A = 7 11/16” (195 mm)
B = 9” (229 mm)
100°,
A = 6 7/16” (164 mm)
B = 7 3/4” (197 mm)
or 110°.
A = 5 9/16” (141 mm)
B = 6 7/8” (175 mm)
Hold-open point at maximum opening
with HCUSH arm.
Spring Cush hold-open points are
approximately 5˚ less than templated
stop point.
LCN
4110 SERIES
Butt Hinges
should not exceed 5” (127 mm) in width.
Auxiliary Stop
is recommended at hold-open point, where a door cannot swing
180°, or where CUSH-N-STOP arm is not used.
Clearance
for EDA, or CUSH shoe is 5 1/2” (140 mm) from door face.
Top Rail
less than 5 1/8” (130 mm) measured from stop requires PLATE, 4110-18.
Plate requires 2” (51 mm) minimum measured from the stop.
Stop Width
minimum 1” (25 mm).
Head Frame
flush or rabetted requires CUSH FLUSH PANEL ADAPTER, 4110-419.
Reveal
less than 2 3/4” (70 mm), use CUSH SHOE SUPPORT, 4110-30 with CUSH
arms.
Blade Stop Spacer
, 4110-61 required to clear 1/2” (13 mm) blade stop.
Cush Arm
requires CUSH SHOE SUPPORT, 4110-30 for fifth screw anchorage with
CUSH arms.
Delayed Action
Add suffix “DEL” to selected cylinder (eg. 4111 DEL). Not
available with 4116 cylinder. Delays closing from maximum opening to
approximately 70°. Delay time adjustable up to approximately 1 minute.
Advanced Variable Backcheck
cylinder starts backcheck at approximately 45°
instead of the normal 75°. Add suffix “AVB” to selected cylinder.
Options
Size 6 or non-sized cylinder.
Delayed Action or Advanced
Variable Backcheck cylinder.
HEDA, CUSH, HCUSH, SPRING
CUSH, SPRING HCUSH or
Fusible Link arm.
Metal cover.
Special Templates
Customized installation templates
or products may be available to
solve unusual applications.
Contact LCN for assistance.
60
LCN CLOSERS
121 W. RAILROAD AVE.
P.O. BOX 100
PRINCETON, IL, USA 61356-0100
PHONE 800-526-2400
FAX 800-248-1460
www.lcn.ingersollrand.com
3/10
*
*5 11/16” (144 mm) For Fusible Link Arm applications