3
The
,
background LED´s
are controlled over the LED-command “GT-Brightness”. The bright-
®
ness of the corona -surrounding light and the O-Light is in several steps and the blue key-
background LED´s can be switched ON/OFF.
Installation
(An LCN-UPP with a high (dim-) load would falsify the measured value! )
Apart from that, the LCN-GT6 should not be installed near lights
. In this case it is
better to install an additional LCN-GRT !
The LCN-GT6 must not “wobble” on the wall, as this would
lead to false triggering. That is why when installing, the edges of the
cavity wall mounted box should be counter-sunk, or the flush mounted
box should not be surmounted on the wall, to guarantee a flawless
function of the LCN-GT6 (LCN-GTS6).
®
Corona -surrounding light
O-Light
(Orientation light) and the
blue key-
Note:
Important:
When the temperature sensor is in use,
no heat sources should be in the flushed
mounted box!
, other heat sources,
cooling devices, as these factors would falsify the temperature values
C
D
LCN-GTS6
®
Installation guide
LCN-GT6
®
