4
1.
Insert guiding pins at an
angle from the bottom
2.
engage to the bottom
corners in a slanted
movement
3.
press the LCN-GT6 towards
the wall, lock slides on the side
When installing, firstly join the T-port cable to the connected UP(x) module
onto the wall.
At the bottom area, the LCN-GT6 must be hooked into the corners of the
mounting frame and pressed towards the wall. Through pushing in the
plastic slider on the side, the LCN-GT6 is locked firmly onto the mounting
frame.
LCN-GT6 (LCN-GTS6) Installation:
LCN-GTS6
®
Installation guide
LCN-GT6
®
IG1
LCN
ISSENDORFF
Oben
adjusting the
mounting frame
green:
help for insertion
and then screw