USER MANUAL
LCTVR6104-8208-8216
www.hrcctv.com
pag.
13
2.3 Remote control
S.N.
key
briefing
1.
At normal running status , press this power key to pop up the
reminder menu, asking whether to shut down , after
confirmation ,the machine will automatically shut down in
safe mode and enter the standby status , with the power
indicating light on panel from red to green.
2.
Press this key to display on left top screen , meaning audio
output is on, subsequently press this key to cancel such
display , meaning audio output is off. At in-situ status , in-situ
voice is output ;at play status,recorded voice is outputted.
3.
select channels bigger than 9 by combining the 1-9 keys and
0 key
4.
Select remote control ID
5.
At in-situ status , ;press key will enter video recording status
(video recording parameters are set under the system menu )
;at video recording status , press the key will stop video
recording.
6.
At play status , press key to backward image at 2x speed ;
further press key to backward image at 4x speed ;finally
press key to return normal play status .
7.
At play status , press key to backward image at 2x speed ;
further press key to backward image at 4x speed ;finally
press key to return normal play status .
8.
At play status , press key to backward image at 2x speed ;
further press key to backward image at 4x speed ;finally press
key to return normal play status .
9.
At play status , press key to backward image at 2x speed ;
further press key to backward image at 4x speed ;finally press
key to return normal play status .
10.
At play status , press key to backward image at 2x speed ; further press key to backward image at 4x speed
;finally press key to return normal play status .
11.
At play status , press key to backward image at 2x speed ; further press key to backward image at 4x
speed ;finally press key to return normal play status .
12.
At play status , press key to backward image at 2x speed ; further press key to backward image at 4x
speed ;finally press key to return normal play status .
13.
At play status , press key to backward image at 2x speed ; further press key to backward image at 4x
speed ;finally press key to return normal play status .
14.
At play status , press key to backward image at 2x speed ; further press key to backward image at 4x
speed ;finally press key to return normal play status .
15.
Confirmation key
16.
Value down for the selected item or revise it
17.
Value up for the selected item or revice it
18.
4-split display on monitor ( 1-4,5-8,9-12 and 13-16 in manner )
19.
9-split display on monitor (1-8 and 9-16 in manner )
20.
16-split display on monitor ( this key won’t work at 8-line DVR )
21.
SEQ
At in-situ preview status, press the SEQ key toh ave the monitor automatically switching big screen image
of channel 1-16 and re-press the key to stop jumping stations.
22.
ESC
press the ESC key will exit from lower level menu to upper level menu until fully exit from the menu status
including the info menu ;in case of password status ,press the ESC key after exit from the main menu will
lock the machine
23.
MENU
At in-situ status ,press this MENU key to enter the menu setting status.
24.
INFO
At in-situ status , press the info key will pup up hard disk information , press the ESC key will exit the INFO
