IT
ALIANO
POLSKI
ESP
AÑOL
FRANCAIS
DEUTSCH
ENGLISH
53
USTAWIENIA SYSTEMU
USTAWIANIE NADAJNIKA
1
2
Wybór grupy częstotliwości (GROUP) i/lub kanału (CHANNEL):
Wcisnąć przycisk SET (GROUP miga). Wyboru żądanej grupy częstotliwości dokonuje się za pomocą strzałek lub (patrz ilustracja
1
).
Ponownie wcisnąć przycisk SET (CHANNEL miga). Wyboru żądanego kanału dokonuje się za pomocą strzałek lub (patrz ilustracja
2
). Potwierdzić wprowadzone dane za pomocą przycisku SET.
Wskazówka: jeden nadajnik może obsługiwać dowolną liczbę odbiorników radiowych, o ile wszystkie odbiorniki mają odbierać ten sam
sygnał i są ustawione na tę samą częstotliwość co nadajnik.
3
Wskaźnik poziomu wejściowego audio:
Wskazanie poziomu wejściowego audio następuje poprzez dwa wskaźniki słupkowe (kanał lewy/prawy, patrz ilustracja
3
).
4
Opcje wyświetlacza LCD:
Poziom wejściowy audio, częstotliwość nadajnika (patrz ilustracja
4
).
Poziom wejściowy audio ustawia się za pomocą regulatora poziomu na panelu tylnym nadajnika. Wyższy poziom wejściowy daje lepszy
stosunek sygnału do szumu. Stopień wejściowy nie może być przy tym przesterowany.
USTAWIANIE ODBIORNIKA
5
6
Wybór grupy częstotliwości (GROUP) i/lub kanału (CHANNEL):
Wcisnąć przycisk SET (GROUP miga). Wyboru żądanej grupy częstotliwości dokonuje się za pomocą strzałek lub (patrz ilustracja
5
).
Ponownie wcisnąć przycisk SET (CHANNEL miga) Wyboru żądanego kanału dokonuje się za pomocą strzałek lub (patrz ilustracja
6
).
Potwierdzić wprowadzone dane za pomocą przycisku SET.