GROUP
Menu item to adjust the frequency group. The LD U500 wireless system has 8 frequency groups, which can be selected as desired. Press the
pressure rotary encoder (MENU) to access the Edit menu and select the menu item
GROUP
by rotating the encoder (light background). Press MENU
again and select one of the groups 01 to 08 by rotating the encoder. To confirm, press MENU. Pressing MENU once more will take you up one level
in the menu structure. Press briefly(!) on POWER to return directly to the main display. After about 10 seconds of inactivity, the main display is
automatically shown.
CHANNEL
Menu item to adjust the frequency channel. The LD U500 wireless system has 8 frequency groups featuring 12 channels each, which can be selected
as desired. Press the pressure rotary encoder (MENU) to access the Edit menu and select the menu item
CHANNEL
by rotating the encoder (light
background). Press MENU again and select one of the channels 01 to 12 by rotating the encoder. To confirm, press MENU. Pressing MENU once more
will take you up one level in the menu structure. Press briefly(!) on POWER to return directly to the main display. After about 10 seconds of inactivity,
the main display is automatically shown.
FREQ MAN
Manual adjustment of the radio frequency in 25 kHz increments. Press the pressure rotary encoder (MENU) to access the Edit menu and select the
menu item
FREQ MAN
by rotating the encoder (light background). Press MENU and adjust the frequency in the MHz range by rotating the encoder.
Press MENU again and adjust the frequency in the kHz range in 25 kHz increments by rotating the encoder. To confirm, press MENU. Pressing MENU
once more will take you up one level in the menu structure. Press briefly(!) on POWER to return directly to the main display. After about 10 seconds
of inactivity, the main display is automatically shown. The display will now show U for user under group GR. and CH.1 under channel.
NAME
To clearly assign transmitters and receivers to a specific performer, you have the ability to show names, numbers, or characters on the display.
Press the pressure rotary encoder (MENU) to access the Edit menu and select the menu item
NAME
by rotating the encoder (light background).
Press MENU and then, as desired, select the letter, number or symbol for the first of the 8 digits provided by rotating the encoder and confirming
with MENU; now, the second digit can be set as desired, etc.. Once the last digit has been confirmed, pressing MENU again will take you to a higher
level in the menu structure. Press briefly(!) on POWER to return directly to the main display. After about 10 seconds of inactivity, the main display is
automatically shown. In addition to the radio frequency, the name is also transferred to the transmitter when synchronizing.
PILOT TONE
The pilot tone feature protects a wireless microphone system against interference of unwanted signals, for example from other radio equipment.
The transmitter adds a second inaudible signal, the pilot tone, to the signal to be transmitted. The receiver identifies this as the matching pilot tone
and frees the corresponding signal. Signals without pilot tone remain muted. Press the pressure rotary encoder (MENU) to access the Edit menu and
select the menu item
PILOT TONE
by rotating the encoder (light background). Press again on MENU and using the encoder, select ON, for initiating
pilot tone (right turn), or OFF for pilot tone equipment switched off (turn left). To confirm, press MENU. Pressing MENU once more will take you
up one level in the menu structure. Press briefly(!) on POWER to return directly to the main display. After about 10 seconds of inactivity, the main
display is automatically shown.
· Battery status of the transmitter
· Audio signal level / Peak (PK)
· Radio frequency in MHz
9
DEUTSCH
FRANCAIS
ESPAÑOL
ENGLISH
ITALIANO
POLSKI
