13
LDEBG3TMB
(suitable for LDEB122G3, LDEB122AG3, LDEB152G3, LDEB152AG3)
H
I
E
G
F
D
B
C
A
J
ASSEMBLY OF THE MOUNTING BRACKET AND TRAVERSE CLAMP
1. Release the safety splint (A) from the two M8 screws (B, C) in the cylindrical pivot/tilt head (D) of the mounting bracket.
2. Unscrew the two screws (B, C) from the pivot/tilt head (D), separate the two cylinder halves and remove the cast piece (E).
3. Now use the parts included – the M10 screw (F), spring washer (G) and self-locking M10 nut (H) – to attach the cast piece (E) firmly to
the traverse clamp (I) using a 17 mm socket tool. To do so, place the traverse clamp in the recess of the cast piece and the self-locking nut
in the recess of the traverse clamp and then insert the screw with the spring washer through the cast piece into the traverse clamp (see
illustration).
4. Now place the cast piece with the traverse clamp into one half of the pivot/tilt head (D) and join the two halves in such a way that the M8
screw (C) can be placed through the appropriate installation hole of the one half, through the support rail (J) of the mounting bracket and
through the installation hole of the cylindrical pivot/tilt head. Place the previously removed washer on the screw and finger tighten the M8
nut. Secure the nut using the previously released safety splint (A).
5. Put the M8 washer onto the M8 lever screw (B), taking care to ensure that the M8 nut is correctly placed in the recess of the appropriate
cylinder half of the pivot/tilt head. Insert the lever screw through the two cylinder halves and tighten. Secure the screw using a previously
released safety splint (A).
IT
ALIANO
POLSKI
ESP
AÑOL
FRANCAIS
DEUTSCH
ENGLISH
