LDP1000 User’s manual
6
3. Specifications
Getter type:
Alloy of Zr/V/Fe
2 beds (350 and 200 Celsius)
Gases purified:
Ar/He/Ne/Xe/Kr. Nitrogen version available.
Impurities removed:
H
2
O,O
2
,CO,CO
2
,N
2
,THC, H
2
, CH
4
(Heated)
H
2
O,O
2
,CO,CO
2
,H
2
(room temperature)
Impurity level :
<1 ppb for each impurity
Flow:
200 cc/min (nominal)
Gas connections:
1/8’’ compression or
1/8’’ VCR
Recommended operating
pressure:
100 PSIG (689 kPAG)
Recommended minimum
operating pressure:
10 PSIG (28 kPAG) optional 1 PSIG (7 kPAG)
Supply:
115 VAC, 50 – 60 Hz or 220 VAC, 50 – 60 Hz
Power consumption:
Maximum 200 watts
Dimensions:
12” (304.8) high, 4.12” (104 mm) deep, 4.25”’ (108 mm) wide
Weight:
5 lbs (2.26 kg)
4. Cautions and installation information
4.1. Gas line connection
Be sure to connect the upcoming gas to the inlet on the top of the purifier. The outlet is
on the bottom. Connecting the gas line incorrectly will decrease the capability of the
purifier to generate pure gas.
1/8” Truelok or 1/8” Face Seal fittings are used to interface your gas line.
Stainless steel tubing is recommended to use with this purifier.
4.2. Installation steps
1.
After removing the purifier from the shipping container and protective wrapping,
ensure that both end caps are tight.
2.
Make sure that fittings in the gas line match those supplied with the purifier.
Summary of Contents for LDP1000
Page 12: ...LDP1000 User s manual 11...
