PAGE 5
GETTING TO KNOW YOUR AT-100PRO
Your AT-100Pro is a quality, precision instrument that will give you many years of outstanding
service; take a few minutes to get to know it.
Front Panel:
The front panel of the AT-100Pro features seven push buttons and two LED bargraph scales:
•
Func:
Activates secondary function of other buttons.
•
Ant:
Selects the active antenna port (Ant1 or Ant2).
•
C Up:
Manually increase capacitance.
•
C Dn:
Manually decrease capacitance.
•
L Up:
Manually increase inductance.
•
L Dn:
Manually decrease inductance.
•
Tune:
Initiates memory or full tuning cycle. Momentary push places tuner in bypass.
•
PWR Meter:
Bargraph display indicates forward power in 0-12.5 and 0-125 watt ranges.
•
SWR Meter:
Bargraph display indicates SWR during tuning or transmission.
Each of the pushbuttons has the primary function listed above when pushed. Additionally, pressing
the
FUNC
button before pressing any other button will activate that button’s secondary function, labeled
beneath each button.
•
Peak:
Selects peak or average for the wattmeter display.
•
Scale:
Selects 125 or 12.5 watts full scale for the wattmeter display.
•
Hi/LoZ:
Manually selects Hi or Lo Z.
•
Auto:
Selects full Auto or Semi tuning mode.
•
Thresh:
Selects the SWR level that will start tuning when in Auto mode.
•
Store:
Stores the current tuner setting into memory for that frequency.
Summary of Contents for AT-100Pro
Page 8: ...PAGE 8 ...
