PAGE 4
with a minimal amount of power, and the YT-450 begins a tuning cycle. At the end of the tuning
cycle, the original mode and power level is restored.
Wait for the tuning cycle to end; you’re now ready to operate!
SPECIFICATIONS
•
1 to 125 watts SSB and CW peak power, 100 watts on 6 meters, and 30 watts on PSK and
digital modes.
•
Latching relays for ultra-low power operation.
•
2,000 memories for instantaneous frequency and band changing.
•
Power: 12V power supplied directly from the radio.
•
Designed specifically for the Yaesu FT-450 and FT-950 HF transceivers.
•
Pass-thru CAT port allows YT-450 to control the FT-xxx over the CAT bus while still
allowing a host PC to also control the radio.
•
Pass-thru CAT port waits for idle CAT activity before controlling the transceiver.
•
1.8 to 54.0 MHz coverage. Frequency for memory storage is read from the radio via CAT.
•
Tunes 4 to 800 ohm loads (16 to 150 on 6M), 16 to 3200 ohms with optional 4:1 Balun.
•
For Dipoles, Verticals, Vees, Beams or any Coax Fed Antenna.
•
IC-450 Interface cable included.
•
Optional external Balun allows tuning of random length, long wire or ladder line fed
antennas. See web site for details.
•
Dimensions: 7.25”L x 7.75”W x 2.25”H.
•
Weight: 1 pound 8 ounces
