PDU6M MANUAL V0.1
3.
FEATURES
NOTE: if you are working in a pure DMX512 signal environment, we strongly
recommend you ALWAYS select the BYPASS mode
THE PDU6M, Power and DMX512/RDM Signal Distribution Unit is an essential fixture of LDR
XPRESS intelligent colour scroller system. Main features of the PDU6M are the following:
- conforms to RDM E1.20-2006 standards (ANSI E1.20-2006 Entertainment Technology RDM
Remote Device Management Over DMX512 Network)
- compatible with traditional colour scroller systems
- compatible with other colour scroller systems based on RDM E1.20-2006
- XLR5F through connector, for connection with next PDU6M
- XLR4F power connector, which supplies signal and power to colour scrollers
- power selection switch: allows selection between 230VAC and 115VAC
- slow blow fuse: it guarantees that the fixture can withstand the impact created by the
starting power of a number of scrollers
- 3-level switch to select the working mode: Normal, Filter and Bypass
all types of input signals can be transmitted,
only standard DMX512 signal can be transmitted, thus meeting the
requirements of some DMX512 signal-based fixtures. When transmitting the DMX512 signal,
transmission relay time is about 280
all types of input signals can be transmitted,with a transmission relay time of
5
. No feedback signal will be transmitted.
- power output for colour scroller: 150VA;
- signal and electrics are isolated, isolating voltage rating: 2500VRMS (60 sec.)
NOTE: make sure you select the desired working mode
the PDU6M is connected to
power
NORMAL mode:
FILTER mode:
BYPASS mode:
before
the transmission relay time is
5µs (microseconds). If the signal conforms to RDM E1.20-2006, feedback signal will be
available with a transmission relay time of 5µs (microseconds)
µs (microseconds)
µs (microseconds)
Page 05 of 22
ENGLISH
4
Luci della Ribalta srl - Via Berna 14, Z.I. Bosco dell’Irta, 46042 Castel Goffredo MN, Italy
tel. +39 0376 771 777 - fax +39 0376 772 140 - email info@ldr.it - web www.ldr.it
