LDR Astro 250 Operating Instructions Manual Download

Page: 5 / 39

Astro 250 Wi-Fi RGBW, DMX 512+ RDM LED followspot - User’s Manual – 1.0

Luci della Ribalta srl, Via Berna 14, 46042 Castel Goffredo (MN) Italy

Tel. +39 0376 771 777 – fax +39 0376 772 140 – email

info@ldr.it

– web www.ldr.it

•

Replacement of any part of the wiring system must be carried out exclusively by

professional personnel in compliance with the original wiring diagram and with components

identical to or compatible with those originally fitted.

•

Installation of this product must be exclusively carried out by professional personnel in

compliance with the safety norms in force in the country where the product is used.

2. CHECK PACKING CONTENT

A. Standard followspot

B. Kit followspot

Astro Wi-Fi in box

Astro Wi-Fi in flight case

Separate mains power cable with PowerCon

Ø28mm spigot for followspot

Iris diaphragm

Clamp-on digital dimmer A20702071

Universal mobile device holder A20702073

3. MOUNTING THE SPIGOT

A spigot is supplied in standard delivery for you to tripod-mount your followspot.

Make sure the tripod you are going to use can withstand the product load as indicated on the

product’s label

Make sure the tripod you are going to use features a top aperture over 28mm dia.

Remove the M12 nut and the washer from the spigot.

Insert the spigot in the central hole of the yoke of the followspot from beneath the yoke.

Add the plain screw and the M12 self- locking nut and tighten the nut with a suitable tool.

Mount the followspot on the tripod.

4. MOUNTING THE IRIS DIAPHRAGM - supplied

The iris diaphragm supplied with the followspot has 20 leaves to size the beam from a maximum

aperture of 68mm to a minimum of 5mm. A black-out iris diaphragm is available to special order.

Using a Phillips screw-driver remove the two cross-head screws from the sides of the iris plate.

Slide the diaphragm in the gate area.

Fix the iris in position by tightening the previously removed screws

Important notice: do not leave the iris closed for over 5 minutes while the LED is on

FAILURE TO COMPLY WITH THE ABOVE NOTICE MAY CAUSE THE IRIS AND THE FOLLOWSPOT TO

SUFFER MAJOR HEAT DAMAGES AND WILL INVALIDATE THE PRODUCT’S WARRANTY

Summary of Contents for Astro 250








































Search results

Summary of Contents for Astro 250

Reviews:

Related manuals for Astro 250

Brands by name

Popular brands

LDR Astro 250, Operating Instructions Manual

Search results

Summary of Contents for Astro 250

Reviews:

Related manuals for Astro 250

Brands by name

Popular brands