Cleaning Aluminum Grease Filter / Stainless Steel Filter less Grill
Changing The Light Bulb
WARNING
• Failure to observe the instructions on cleaning the unit and changing the filters could cause a fire
hazard. You are therefore strongly recommended to follow these instructions.
• The manufacturer
shall not be held liable
for any damage
s
to the motor or
damages caused by fire as an
aftermath of
inappropriate maintenance or failure to observe the above safety recommendations.
• Disconnect the cooker hood from the main supply.
• Remove the lamp cover, use a screw driver as a lever. Fig. 5.
• Replace the old bulb with a new one of the same type.
• Re
place
the lamp cover.
• If the light does not come on, make sure the bulb has been inserted in correctly before contacting your
local AEG Service Force Centre.
Fig. 5.
17
Cappe International Inc. 2014