WIFI NAME: Eis-Wif-xxxxxx
5) WIFI connection
During search satellites ,
Step 1: Open WIFI setting ,and search the WIFI name start at Eis*****, and connect it.
Step 2: Launch the APP until you can view the application's real time video.
Tips: You may connect to the drone's WIFI at any step.
6) Compass calibration
Step1 :
Put the aircraft on a horizontal place, short press the Compass calibration button, and all
the indicator lights of the drone will flash slowly.
Step2 :
Hold the aircraft horizontally and rotate it 360 degrees, and loop about 3 times until the
rear lights are
ON
, the horizontal calibration is completed. At this time, the vertical direction
can be performed.
Step3 :
Hold the aircraft vertically and rotate it 360 degrees around a vertical axis,and loop 3 times,you
will hear "
DI
" during this process .When the front lights are
ON
,this confirms calibrating the compass
successfully.
Attention :
1) lt is not necessary to calibrate the compass at NO GPS MODE.
2) When taking off from the same location, it is not necessary to calibrate the compass every time
the drone is powered on. But we recommend that it is better to calibrate the compass.
3)
You can calibrate the compass with the remote control or APP.
ALWAYS REFER TO INSTRUCTION MANUAL FOR COMPLETE DETAILS
7) Gyroscope calibration
At the same time, pull Left and Right Joystick of the remote inwards to 5 o’clock position and
hold for 3-5 seconds, the aircraft’s lights will flash quickly during the process , once the lights
change back to the previous lights ,gyroscope calibration is completed.
8) GPS Switch
(DEFAULTS GPS MODE )
GPS mode=Outdoor mode ; NO GPS mode=Indoor mode
1. Press the GPS mode button and hold for 3 seconds until you hear one sound "DI" beep , switch
to NO GPS MODE successfully;
2. Press the switch mode button and hold for 3 seconds, and hear two sounds of "DI DI"beeps,
switch to GPS MODE successfully;
Gyroscope calibration
