background image

Warranty:

All warranty is one year parts and labour unless specified and is on manufac-

turer defect only. Abuse or poor maintenance is not accepted. Le Maitre
fluids must always be used. Any trace of other fluids will automatically void

ALL

 warranties. Accept no substitutions as there are no exceptions to this

rule.  Proof of purchase or proof of sale must  always  accompany any
warranty returns.  An RA (return authorization) number must be noted on the
outside of any box returned to our facilities. Any packages without a clearly
marked RA number will not be accepted by our receiving department.
Freight on warranty items are freight prepaid to our facility and we will prepay
freight back to your facility after repair, by the most economical means
available. Should you require the item express-returned, then you are respon-
sible for any difference in freight cost.

Return Policy:

Return of any product must be done within 30 days of purchase. The pack-

age must be returned freight prepaid and the RA number clearly marked on
the outside of the box. A restocking charge of up to 25% may be levied. Only
credits are issued to the dealers account.  Any  product not returned within 30
days is considered purchased.

Warning:

Le Maitre Special Effects Inc. considers all it's product to be safe for use in

the application it was intended. Le Maitre Special Effects takes no responsi-
bility for misuse or incorrect use. Always refer to equipment owners manual
for proper use.

Warranty

 Maxi Fog Fluid was developed for our high volume users requiring an excellent balance

of price and performance without compromise.

All of our Fog Fluids are water base and leave NO residue.  Permanent damage will

occur if Haze Fluid is used in Battle Fogger for any length of time.

Maxi Fluid:

9

Summary of Contents for Battle Fogger













Reviews: