background image

www.lemaitrefx.com

Return Policy:

Return of any product must be done within 30 days of purchase.

The package must be returned freight prepaid and the RA number

 clearly marked on the outside of the box. A restocking charge of

up to 25% may be levied. Only credits are issued to the dealers

account.  Any  product not returned within 30 days is considered

purchased.

Warning:

Le Maitre Special Effects Inc. considers all it's product to be safe for

use in the application it was intended. Le Maitre Special Effects

takes no responsibility for misuse or incorrect use. Always refer to

equipment owners manual for proper use.

Safety  Precautions

1. Ensure that operation of the machine is supervised by suitably

    trained and authorised personnel.

2. Do not modify the machine or use a machine which has been

   damaged  in any way.

3. Allow sufficient air circulation around the machine at all times.

4. Protect the Neutron XS from direct weather effects.

5. Only use fluids recommended by the Manufacturer.

6. Do not continue to produce haze output in an enclosed area

    when visibility is reduced below 50cm.

11

Summary of Contents for Neutron XS Hazer
















Reviews: