EN
30 RUE AMBROISE 1 I 40 390 ST MARTIN DE SEIGNANX (France)
Tél +33 (0)5 59 56 60 70 - Fax +33 (0)5 59 56 10 79
lemarquier.com
PRESENTATION OF THE “PLANCHA” CONTACT-GRIDDLE
Thank you for purchasing a contact-griddle by LE MARQUIER.
The contact-griddle is ideal on a terrace or in the garden as it provides for healthy and natural cooking of all your
barbecued foods: fish, seafood, meat, poultry, game, etc. in a fun-filled atmosphere.
Every burner is controlled by a valve topped with a control lever used to adjust its power.
FOR YOUR SAFETY
CAUTION: Accessible parts may be very hot. Keep young children away.
Should only be used outside.
Do not move the appliance during use.
Close the gas container’s valve after use.
Any modification made to the appliance could be dangerous.
This appliance must be kept away from flammable materials.
Allow the appliance to cool down before cleaning.
Do not use an adjustable pressure reducer.
The parts protected by the manufacturer or its representative should not be handled by the user.
Use protective gloves when handling particularly hot elements.
There must be no flammable material around or under the appliance.
If you smell gas, close the gas bottle’s valve.
ASSEMBLY AND INSTALLATION
This appliance must be kept away from flammable materials during use.
Do not store or use petrol - or other flammable liquids or vapours - close to the appliance.
Adjust the plate’s slope using the 2 screws located under the plate.
PLACE OF USE
This appliance must be used outdoors on a heat-resistant, non-flammable horizontal support (firebrick, tiling, stainless
steel, etc.). There should be no flammable materials within a radius of 0.50 metres from your appliance.
GAS CONNECTION
We recommend 6 to 13kg commercial butane or propane bottles and using the appropriate safety pressure reducer.
The gas bottle used, equipped with the pressure reducer, must have a maximum height of 615mm and width of 310mm.
If the gas bottle is placed on the trolley, it must have a maximum height of 400mm and depth of 310mm.
For butane gas: Use a fixed pressure reducer of 28 mbar which meets the NF EN 12864 standard.
For propane gas: Use a fixed pressure reducer of 37 mbar which meets the NF EN 12864 standard.
The connection from the appliance to the gas bottle (Butane or Propane) is carried out by a flexible metal hose with an
NF D 36125 mechanical connector (unlimited usage) or a flexible rubber hose equipped with an NF D 36112 mechanical
connector (10-year usage) with a maximum length of 1.5 metres. Regularly check that the gas hose is in good condition
and do not hesitate to change it if shows cracks or signs of wear. Change when the expiry date printed on the hose has
been reached.
The plancha must be connected using the G1/2 connector located on the right-hand side of the appliance. After having
connected the hose to the plancha, connect the pressure reducer on the hose then on the bottle by following the
indications supplied with the hose and the pressure reducer.
If a gas leak is observed, close the gas bottle’s valve and double check the connections and carry out another leak test.
If the leak continues or originates from another part, contact the manufacturer.
Never use a leaking appliance.
When changing the gas bottle, please respect the following instructions:
It must only be changed outside, far from any source of ignition or heat.
Wait for the appliance to have completely cooled down.
Before changing the gas bottle, ensure its valve is fully closed.
