16
DESCRIPTION OF MAIN PARTS (Fig.1)
Fig.1
1.
Motor housing
2.
Grass catcher
3.
Lower handlebar
4.
Upper handlebar
5.
Handlebar securing knob
6.
Safety button
7.
Switch lever
8.
Rear deflector
9.
Cable retainer
10.
Wheel
11.
Deck 12.
Cable clip
13.
Height adjustment lever
14.
Switch box
ASSEMBLY
1) Mounting the handlebar
−
Put the cable hook on upper handle.(Fig.2)
−
Connect upper and lower handles with supplied screws and knobs. (Fig.3)
−
Insert the two lower handlebar tubes into the holes on main body. And fix it with lock
screw (15) (Fig.4.1-Fig.4.3))
−
Fix the cable holders(9) on handlebar.(Fig.5)
2) Fix the wheel
−
Fit each wheels over the axles, secure in place with the washer & nut and press the
wheel covers into place.(Fig.6)
3) Fitting the grass catcher
−
Assemble two halves and fix them together.(Fig.7)
−
Lift the flap and place the grass box over the lugs.(Fig.8)
OPERATION
Setting the cutting height (Fig.9)
NOTE: Stop, release switch lever and wait until the motor stops before adjusting
height, the blades continue to rotate for a few seconds after the machine is switched
off, a rotating blade can cause injury.
For the first cut of the season .a high cutting adjustment should be selected.
The cutting height can be selected among 20 mm, 70 mm ,
1.
To raise the blade height, grasp the height adjustment lever and move it toward the
back of mower.
2.
To lower the blade height, grasp the height adjustment lever and move it toward
the front of mower.
Power connection (Fig.10)
Summary of Contents for LE10150-36B3BR
Page 2: ...1 2 3...
Page 3: ...4 1 5 4 2 4 3 9 6 7 8 9 10 11 12...
Page 4: ...13 14...
Page 36: ...9 www dunsch com...
