5
7. Never touch the spark plug or plug cord while the engine is in operation .Doing so may
result in being subjected to an electrical shock .
8. Never touch the muffler, spark plug or other metallic parts of the engine while the engine
is in operation or immediately after shutting down the engine. Doing so may result in
serious burns.
9. When you finish cutting in one location and wish to continue work in another
spot, turn off the engine and turn the until as the blade faces away from your body.
10. Check the cutting attachment stop turning under the engine idle before start to use the
machine.
ASSEMBLY
When assembling this machine, please follow the instructions for assembly steps.
1.
Assemble the handle on the machine.
First release the inner hex screws, second take
underside handle on the shaft, last assemble the unperside handle tighten the inner screws
enough.
2.
Assemble the safe guard.
Fix the safe guard with hex key and wrench enclosed as
stardard accessories for tighting the nuts enough. Please see the below pictures showing.
Warning!
Use only original manufacturer's replacement parts, accessories and attachments. Failure to
do so can cause poor performance, possible injury and may void your warranty. Never use
the machine without the guard assembled!
5)
Assemble the cutting head.
3.1
Release the nut.
Line up the two holes of flange and shield, use one hex kep to hold
the flange as below and turn the socket wrench clockwise, the nut will be released.
Summary of Contents for LE25326D
Page 31: ...9 www dunsch com...
