24
3.DESCRIPTION OF SYMBOLS
Caution! Risk of injury and/or damage and/or deterioration of product in case of
non-compliance to safety requirements.
Read the instructions manual.
Do not expose to or use in weather conditions (ex.: storm, rain, snow ...), moisture.
Do not use in damp or wet areas.
The machine must NOT be sprayed with water (danger due to the presence of electric
current).
Do not operate the unit outdoors when it is raining.
Always operate your log splitter on dry, solid, level ground.
Never operate your log splitter on slippery, wet, muddy, or icy surfaces.
The location you choose should be free from any tall grass, brush, or other interferences.
There should be plenty of room for handling, and help the operator stay alert.
To avoid tripping, do not leave tools, logs, or other components laying around the work area.
Do not use it in areas where fumes from paint, solvents or flammable liquids pose a potential
hazard.
Make sure there are no nails or foreign objects in logs to be split.
Never attempt to split logs containing nails, wire or debris.
The ends of the logs must be cut square. Always make sure that both ends of the log you are
splitting are cut as square as possible. This will prevent the log from sliding out of position
while under pressure.
Branches must be cut of flush with the trunk.
−
Protect your eyes and face
−
Wear protective boots to protect your feet against potential falling logs.
−
Wear protective gloves to protect hands against wood debris and splits.
−
Protective electrically non-conductive gloves and non-skid footwear / protective boots are
recommended when working.
Summary of Contents for LE581504H
