Leach 1298-IM-EN, Instruction Manual

Page 

2

Mini Tower

 | Assembly Guide

Introduction

Please  read  these  instructions  carefully  and  ensure  that  you  fully  understand  all  of  the  information 
contained herein. All of the information in this document is vital for the safe utilisation of your Mini 
Tower.

All products are professional quality engineered equipment designed primarily with safety in mind and 
meet or exceed all standards, recommendations and guidelines. Used properly, 

the

 equipment will keep 

you safe when working at height.

This manual contains all of the information necessary to correctly assemble your Mini Tower and 
incorporates all of the requirements of the PASMA 3T method of assembly as endorsed by the HSE.

This  manual  should  be  used  in  conjunction  with  your  Risk  Assessment  and  Method  Statement  and  in 
line with the Work at Height Regulations 2005 which place an obligation on employers to eliminate or 
minimise risks. This manual must be made available to the user/assembler at all pertinent times.

Only competent and qualified personnel should undertake erection, dismantling or alteration, organisation, 
planning or supervision of mobile access towers. In the case of any doubt, sufficient relevant additional 
training  must  be  given  beforehand  to  ensure  safe  use.  For  further  information  on  the  use  of  mobile 
access towers consult PASMA (www.pasma.co.uk; Tel +44 (0) 845 230 4041). 
For any additional technical information  or  specific  advice  please  contact 

LEACH'S

Tel: 

+44 (0)1432 346 800

 or Email: sales@

leachs

.com. Please note that diagrams are for illustrative 

purposes

only. User guides are also available to download from our website www.

leachs

.com

Certifications

The Mini Tower is a mobile access tower compliant with EN 1004 Class 3. This tower is not suitable for 
applications outside of EN1004 or other than as described in these instructions. This tower is manufactured 
in our ISO 9001 accredited facility. This manual complies with EN 1298-IM-EN.

Maximum Safe Working Loads

The safe working load of the tower is 350 kg including its own weight. The maximum safe working load 
of any individual platform is 200 kg evenly distributed. If the tower is to be used in an application 
outside the scope of EN1004, contact your supplier, 

LEACH'S

, for advice on loadings. 

Tel: 

+44 (0)1432 346 800

 or Email: sales@

leachs

.com.