® SENSITIVITY Selector:
Push button switch for 20mV, 200mV, respectively.
(j)
IMPEDANCE Selector:
Selector for input impedance of IMn and
son.
®
INPUT Connector:
Put a signal in to measure.
®
Handle/Stand combination:
The lock of the handle can be released by pressing the mounted part of the handle on both
sides with both hands. The handle can then be freely rotated. When the hand is released, it
is locked.
@
Unit Indicator:
For frequency measurement, the indicator shows "MHz" at 2S0MHz Freq. Range; and "kHz"
at 80MHz Freq. Range. "mS" is displayed in the case of period measurements.
@
Display:
It is a 8-digit, 7-segment, fluorescent display. In accordance with the measuring range, the
decimal point is displayed automatically, and the leading zeros are blanked.
@
GATE indicator:
Displays the opened or closed state of the GATE. When GATE is open, indicator is lit.
@
OVERRANGE indicator:
Lights when the frequency is over the counting capacity of 8 digits. In the case of
overrange, push the GATE TIME/MULTI. selector to smaller values un til the overrange indi
cator light goes off.
3.2
Rear Panel:
Fig. 3-2
...... 4 .....
.
