BOOST mode:
While riding and speed reaching to 25km/h, press and hold “ BOOST” button with 2 seconds to activate, then
motor will give 100% output power and flowing without pedaling, it feels more like a constant strong push in
the back; On the contrary, release the button and exit from BOOST mode.
Parameter setting
Press and hold “+” & “
-
” button synchronously to enter into Display Setting interface, and briefly press “+” or
“
-
” to switch to from “Setting” to “EXIT“ and then briefly press “ON/OFF” button to confirm the operation.
Unit (Km/mile):
Briefly press “+” or “
-
” to go to “UNIT”, and then briefly press ”ON/OFF” to switch between “Metric”/
“Imperial”, then briefly press ”ON/OFF” to confirm selection and save the setting and exit back to the
“UNIT”. Press and hold “+” and “
-
” synchronously to
save and exit back to the main interface,or you can also
select “BACK” → “EXIT” to exit back to the main interface.
Auto Off
Briefly press “+” or “
-
” to go to “Auto Off”, and then briefly press ”ON/OFF” to select among
“OFF”/“9”/“8”/“7”/“6”/“5”/“4”/“3”/“ 2”/“1”ten levels, then briefly press ”ON/OFF” to confirm selection and
save the setting and exit back to the “Auto Off”. Press
and hold “+” and “
-
” synchronously to save and exit
back to the main interface, or you can also select “BACK” →
“EXIT” to exit back to the main interface.
Notice: “OFF” means this function is off, the unit is minute.
Summary of Contents for Acron
Page 2: ......
