■
OPERATION
5-48
■
NOTE
If the currently displayed address is the start address, the end address is recalled.
3
Press the
LIST
CLR
key.
The start address is recalled.
■
NOTE
If the
LIST
CLR
key is pressed when the start and end addresses are cancelled, the
address 00 is recalled.
5-14-5 Grouped sequential recalling operation
Preset memories can be divided into up to ten groups. Then you may specify a desired one group
to perform sequential recalling.
Ex. Defining Group 5 with a start address set to 12 and an end address set to 34
1
Press the
SHIFT
key.
2
Press the
STO
RCL
key.
。
3
Press the
PORT 2
・
key.
4
Enter a two-digit start address with the data keys.
1
2
5
Press the
PORT 2
・
key.
6
Enter a two-digit end address with the data keys.
3
4
7
Press the
PORT 2
・
key.
8
Enter a group number with the data keys.
5
9
Press the
ENTER
key.
■
NOTE
More than one group can share same addresses.
