12. VECTORSCOPE DISPLAY
108
12.6.2
Setting the Line Selection Range
When the input signal is interlace or segmented frame, to set the line select range, follow the
procedure below.
Changing this setting will also change the picture display and video signal waveform display
line selection ranges.
Procedure
Settings (the examples are for the selectable ranges when the input signal is 1080i/59.94)
FIELD1:
A line from field 1 can be selected.
(Example: 1 to 563)
FIELD2:
A line from field 2 can be selected.
(Example: 564 to 1125)
FRAME:
All lines can be selected.
(Example: 1 to 1125)
VECTOR → F•3 LINE SELECT → F•2 FIELD: FIELD1 / FIELD2 / FRAME
