123
13. STATUS DISPLAY
Settings
START:
The event log is started. “NOW LOGGING” appears on the event log screen
and the status screen.
STOP:
The event log is stopped. “LOGGING STOPPED” appears on the event log
screen and the status screen.
13.2.3
Clearing the Event Log
To clear the event log that is displayed on the screen, follow the procedure below.
The event log is also cleared when you perform the following operations.
• Initialize the LV 5333
• Perform an error reset
• Turn off the power
Procedure
13.2.4
Selecting the Overwrite Mode
To select the event log overwrite mode, follow the procedure below. The event log can
record up to 1000 events. When the same error occurs successively, it is treated as a single
event in the event log.
Procedure
Settings
OVER WR: Events after the 1000th event are written over the oldest logged events.
STOP:
Events after the 1000th event are not logged.
STATUS → F•1 LOG → F•4 LOG MODE: OVER WR / STOP
STATUS → F•1 LOG → F•3 CLEAR
