13. AUDIO DISPLAY (AUDIO)
154
13.4
Lissajous Settings (LISSAJOU SETUP)
To configure lissajous settings, press F•3 LISAJOU SETUP in the audio menu. You can set
the lissajous curve display format, gain, and intensity, and you can set the scale display
format and intensity.
AUDIO (press and hold)
→
F•3 LISSAJOU SETUP
→
Figure13-5 LISSAJOU SETUP menu
13.4.1
Selecting the Display Format
To select the lissajous curve display format, follow the procedure below.
In the single lissajous display, the L and R channels set using SINGLE LISSAJOU are
displayed. In the multi-lissajous display, the channels assigned to 1st GROUP and 2nd
GROUP using SDI GROUP are displayed.
The correlation meter in single lissajous mode indicates the phase difference between the
two signals. A reading of 1 indicates that the signals are in-phase, a reading of -1 indicates
that the signals are 180° out of phase, and a reading of 0 indicates that the signals are not
correlated.
[Reference] SINGLE
LISSAJOU
→
Section 13.2.2, “Selecting Input Channels in the Single Lissajous
Display”
SDI GROUP
→
Section 13.2.1, “Selecting the Audio Display Input Channels”
Procedure
AUDIO (press and hold)
→
F•3 LISSAJOU SETUP
→
F•1 LISSAJOU MODE
Settings
SINGLE:
The lissajous curves, meters, and correlation meter of two channels are
displayed.
MULTI:
The lissajous curves and meters of eight channels are displayed. This is the
default setting.
