7. 3D ASSIST DISPLAY FEATURE
68
1 V
cursor
This is the vertical cursor.
2 L
cursor
This is a disparity measurement cursor. Match this cursor with the video signal for the
left eye.
3 R
cursor
This is a disparity measurement cursor. Match this cursor with the video signal for the
right eye.
4 Luminance
level
The luminance levels at the intersections of the cursors are displayed as percentages.
When a luminance level is 0.0 % or less or 80.0 % or greater, the measured value is
displayed in yellow.
Press F•3 %DISPLAY to turn the display ON and OFF.
5 Time
code
The time codes for the video signal for the left eye and the video signal for the right
eye are displayed.
6 Upper
Limit
This displays the upper disparity limits that were set on the PARAMETER display.
Depending on the cursor position, these switch automatically between the Far upper
limits and the Near upper limits.
7 Result
When at least one measured value exceeds its upper limit, this displays “NG” in red.
When all measured values are less than or equal to their upper limits, this displays
“OK” in green.
8 Measured
values
This displays the disparities that are measured by the cursors.
9 Viewing
environment
This displays the viewing environment that has been configured on the PARAMETER
display.
10 Far
or
Near
When the L cursor is on the left side, this displays “Far.” When the L cursor is on the
right side, this displays “Near.”
