12. VECTOR DISPLAY
144
12.7.3
Selecting the Scale Unit
To select the scale units on the 5-bar display, follow the procedure below.
To set the composite display format, set COMPOSIT FORMAT in the system settings.
For information on the COMPOSIT FORMAT setting,
see section 5.1.5, “Selecting the Composite Display Format.”
Procedure
VECT
→
F•5 5BAR SETUP
→
F•2 SCALE: % / mV
Settings
%:
The scale shows % and IRE.
mV:
The scale shows mV. The scale values change as follows depending on the
composite display format:
100% = 700 mV, 100IRE = 714 mV (when the display format is NTSC)
100% = 700 mV, 100IRE = 700 mV (when the display format is PAL)
SCALE = %
SCALE = mV (when the display format is NTSC)
SCALE = mV (when the display format is PAL)
Figure 12-22 Selecting the scale unit
