13. AUDIO DISPLAY
150
13.3.3
Selecting the Headphone Output Channels
The channels that you can transmit from the headphone jack vary depending on the input
mode.
In single input mode or 3D assist mode (HF SbyS, TOP&BOTM) (option), the channels that
you select with F•1 L and F•2 R are transmitted.
In simultaneous input mode or 3D assist mode (L/R DUAL) (option), the input signal
channels that you select with F•3 PHONES CHANNEL (from the channels that you
selected with F•1 DECODE CHANNEL) are transmitted.
If the audio Lissajous option (the LV 5381SER02, which is sold separately) is not installed,
the output channels are fixed to channels 1 and 2. In Simultaneous Input Mode or 3D
Assist Mode (Option), channels 1 and 2 of the input signal that you select with F•1
PHONES CHANNEL are transmitted.
See section 4.3.1, “Switching the Input Mode.”
●
In Single Input Mode or 3D assist mode (HF SbyS, TOP&BOTM) (Option)
To select the channels to transmit, follow the procedure below.
You can choose the channels from the eight channels assigned to F•1 1st GROUP and F•2
2nd GROUP.
Procedure
AUDIO
→
F•1 CHANNEL SELECT
→
F•3 PHONES CHANNEL
→
F•1 L
→
F•2 R
Settings
Range:
The channels assigned to 1st GROUP (four channels) and the channels
assigned to 2nd GROUP (four channels).
(The default values are CH1 for L and CH2 for R.)
●
In Simultaneous Input Mode or 3D Assist Mode (L/R DUAL) (Option)
To select the output signal, follow the procedure below.
The channels that can be transmitted are those that were selected with F•1 DECODE
CHANNEL.
Procedure
AUDIO
→
F•1 CHANNEL SELECT
→
F•3 PHONES CHANNEL: Ach / Bch / Cch / Dch
●
In Simultaneous Input Mode or 3D Assist Mode (L/R DUAL) (Option), When the Audio
Lissajous Option Is not Installed
To select the output signal, follow the procedure below.
The output channels are fixed to channels 1 and 2.
Procedure
AUDIO
→
F•1 PHONES CHANNEL: Ach / Bch / Cch / Dch
