5. SYSTEM SETTINGS
44
5.7
Initialization
To initialize the settings to their default values, follow the procedure below. For information
about the default values, see section 16.1, “Menu Tree.” The default values are underlined.
To cancel the initialization of the settings, press F•3 INIT CANCEL.
Even if you initialize the settings, the date, time, presets, display mode presets, CINELITE II
gamma correction values (option), remote control settings (option), and user layouts are not
initialized.
Procedure
SYS
→
F•5 next menu
→
F•1 INIT
→
F•1 INIT YES
5.8
Setting the Menu Display Time
Menus automatically disappear after 10 seconds of user inactivity. To set this time in units of 5
seconds, follow the procedure below (menus do not automatically disappear if OFF is
selected.) Press F•D 1 to reset the setting to its default value (10 seconds).
Regardless of the display time setting, the input menu, system menu, preset registration
menu, and preset menu do not disappear because of user inactivity.
Procedure
SYS
→
F•5 next menu
→
F•2 MENU AUTO OFF
→
F•D 1 TIME SET: 5 sec - 10 sec - 60 sec
/ OFF
5.9
Configuring License Settings
5.9.1 Installing
Options
To use an option that requires a license, you must enter the appropriate license key.
A license key is a key code that activates an option on the LV 5381. LEADER will send you
a license key when you purchase an option. When purchasing an option tell us the MAC
address and the serial number of your LV 5381.(*1, *2) Each LV 5381 requires a unique
license key. You cannot use the same key for multiple instruments.
*1
You can view the MAC address from the license display.
*2
The serial number is printed on a label on the rear panel.
