7. PRESET FEATURE
54
7.2
Display Mode Presets
7.2.1
Registering Display Mode Presets
1. Set the LV 5381 to the settings that you want to register.
2. Hold
down
PSET.
The preset registration menu appears.
3. Press F•2 FUNCTION PRESET.
The file list screen appears. This setting does not appear when the multi-screen
display is in use.
Figure 7-5 File list screen
4. Press F•2 COMMENT INPUT.
The file name input screen appears.
5. Enter a file name using up to 16 characters.
The key operations that you can perform on the file name input screen are as follows:
F•1 DELETE
Deletes the character at the cursor
F•2 <=
Moves the cursor to the left
F•3 =>
Moves the cursor to the right
F•4 CHAR SET
Enters the character
F•D 1 CHAR SELECT Turn to select a character, and press to enter the character.
After you enter the file name, press F•5 up menu.
You can also copy the file name of an already registered file. To copy a file name,
move the cursor to the file in the file list whose name you want to copy, and then press
F•D 1 FILE SELECT.
6. Turn F•D 1 FILE SELECT to select the file number of the file you want to register.
7. Press
F•3
STORE.
If a file has already been stored with the file number that you selected, an overwrite
confirmation prompt appears. If you want to overwrite the current file, press F•1 OVER
WR YES. Otherwise, press F•3 OVER WR NO.
