6. HDR DISPLAY (SER07)
103
To set the display colors, follow the procedure below. If you set REF at boundary of the SDR
area and HDR area, the SDR area can be displayed in monochrome and HDR area in color.
UPPER or higher:
magenta
REF or higher, UPPER or lower:
Gradation from blue to red
LOWER or higher, REF or lower:
monochrome
LOWER or lower:
black
Procedure
PIC
→
F•4 CINELITE/HDR
→
F•2 CINEZONE SETUP
→
F•2 UPPER
→
F•3 LOWER
→
F•4 REF
The values vary depending on the HDR tab settings as follows.
Set the values as percentages of the input video level. If F•5 BRIGHTNESS INFO is set to
ON, HDR equivalent values are displayed in the upper left corner of the screen.
Table 6-2 Display color values
Setting range UPPER Default LOWER Default REF Default
HDR tab HLG
0.0 to 100.0
100.0
0.0
50.0
PQ
10000cd/m2 0.0 to 100.0
100.0
0.0
50.8
4000cd/m2
0.0 to 100.0
90.0
0.0
50.8
1000cd/m2
0.0 to 100.0
75.2
0.0
50.8
S-Log3
3.5 to 109.4
100.0
3.5
61.0
Summary of Contents for LV 5480
Page 15: ...2 VIDEO SIGNAL WAVEFORM DISPLAY 7 SCALE UNIT HDV SDV SCALE UNIT HD SD SCALE UNIT 150 ...
Page 38: ...2 VIDEO SIGNAL WAVEFORM DISPLAY 30 COLOR MATRIX XYZ COLOR MATRIX GBR COLOR MATRIX RGB ...
Page 98: ...5 PICTURE DISPLAY 90 STATUS INFO ON Figure 5 34 Turning the information on and off ...