8. STATUS DISPLAY
134
●
CRC Error(Except SD)
Select whether to detect CRC errors. This setting is valid when the input signal is not SD.
OFF / ON
●
EDH Error(SD)
Select whether to detect EDH errors. This setting is valid when the input signal is SD.
OFF / ON
●
Illegal Code Error
Select whether to detect illegal code errors.
OFF / ON
●
Frequency Error
Select whether to detect frequency deviation errors.
Even when this is set to OFF, the frequency deviation is still shown in the status display.
OFF / ON
●
Cable Error
Select whether to detect cable errors.
Even when this is set to OFF, the cable length is still shown in the status display.
OFF / ON
●
3G Cable
Select the cable to use for cable length measurements when the input signal is 3G.
LS-5CFB / 1694A
●
3G Cable Error
Set the upper limit for the cable error when the input signal is 3G. If this value is exceeded,
an error will occur, and the measured value on the status display will be displayed in red.
10 - 105 m
●
3G Cable Warning
Set the upper limit for the cable warning when the input signal is 3G. If this value is
exceeded, a warning will occur, and the measured value on the status display will be
displayed in yellow.
10 - 105 m
●
HD Cable
Select the cable to use for cable length measurements when the input signal is HD.
LS-5CFB / 1694A
Summary of Contents for LV 5480
Page 15: ...2 VIDEO SIGNAL WAVEFORM DISPLAY 7 SCALE UNIT HDV SDV SCALE UNIT HD SD SCALE UNIT 150 ...
Page 38: ...2 VIDEO SIGNAL WAVEFORM DISPLAY 30 COLOR MATRIX XYZ COLOR MATRIX GBR COLOR MATRIX RGB ...
Page 98: ...5 PICTURE DISPLAY 90 STATUS INFO ON Figure 5 34 Turning the information on and off ...