3. VECTOR WAVEFORM DISPLAY
36
3.1.6
Selecting the Scale
When COLOR MATRIX is set to COMPONEN, follow the procedure below to select the
scale type.
Reference
COLOR MATRIX → section
3.6.1, “Selecting the Color Matrix.”
Procedure
VECT
→
F•1 INTEN/SCALE
→
F•3 VECT SCALE
→
F•4 VECT SCALE: AUTO / BT.601 /
BT.709 / DCI / BT.2020
Settings
AUTO:
A scale for the colorimetry selected in the system settings is displayed.
BT.601:
A scale defined in ITU-R BT.601 is displayed. When the input signal is SD and
a 100 % color bar signal is being applied, the peak levels match the ends of
the scale.
BT.709:
A scale defined in ITU-R BT.709 is displayed. When the input signal is HD and
a 100 % color bar signal is being applied, the peak levels match the ends of
the scale.
DCI:
A scale defined in DCI is displayed.
BT.2020:
A scale defined in ITU-R BT.2020 is displayed. When the input signal is 4K, the
division transmission system is 2 sample interleave, and a 100% color bar
signal is being applied, the peak levels match the ends of the scale.
3.2
Setting the Gain
To configure the gain settings, press F•2 VECT GAIN on the VECT menu.
VECT
→
F•2
VECT GAIN →
Figure 3-5 VECT GAIN menu
Summary of Contents for LV 5480
Page 15: ...2 VIDEO SIGNAL WAVEFORM DISPLAY 7 SCALE UNIT HDV SDV SCALE UNIT HD SD SCALE UNIT 150 ...
Page 38: ...2 VIDEO SIGNAL WAVEFORM DISPLAY 30 COLOR MATRIX XYZ COLOR MATRIX GBR COLOR MATRIX RGB ...
Page 98: ...5 PICTURE DISPLAY 90 STATUS INFO ON Figure 5 34 Turning the information on and off ...
