Leader LV 5480 Function Menu Explanations Download

Page: 54 / 246

3. VECTOR WAVEFORM DISPLAY

3.7

5-Bar Display

In the 5-bar display, the YC

signal is converted into a GBR or pseudo-composite signal,

and the peak levels of the converted signal's Y, G, B, R, and CMP (composite) components are
displayed simultaneously using five bars.

Figure 3-16 5-bar display

●

Levels that fall outside of the range that you set using Luminance Upper and Luminance
Lower on the status menu are displayed in red.

Reference Luminance Upper/Lower

→ Section

8.2.4, “Error Setup 4”

●

GBR

Levels that fall outside of the range that you set using Gamut Upper and Gamut Lower on
the status menu are displayed in red.

Reference Gamut Upper/Lower

→ Section

8.2.3, “Error Setup 3”

●

CMP

Levels that fall outside of the range that you set using Composite Upper and Composite
Lower on the status menu are displayed in red.

Reference Composite Upper/Lower

→ Section

8.2.3, “Error Setup 3”

●

Use the vector menu to configure the 5-bar display settings.

VECT

→

Figure 3-17 Vector menu

Summary of Contents for LV 5480























































































































































































































































Search results

Summary of Contents for LV 5480

Reviews:

Related manuals for LV 5480

Brands by name

Popular brands

Leader LV 5480, Function Menu Explanations

Search results

Summary of Contents for LV 5480

Reviews:

Related manuals for LV 5480

Brands by name

Popular brands