2. ETHERNET
38
Command Parameter1
Description
X1
In case of line display, set the sweep magnification so that
the waveform fits on the screen.
X10
In case of line display, set the sweep magnification to x10
with respect to x1.
ACTIVE
In case of line display, magnifies and displays the waveform
in the active interval.
X20
In case of line display, set the sweep magnification to x20
with respect to x1.
WFM:SWEEP:H_MAG
?
Queries the sweep magnification mode in case of line
display.
X1
In case of field (frame) display, set the sweep magnification
so that the waveform fits on the screen.
X20
In case of field (frame) display, set the sweep magnification
to x20 with respect to X1.
X40
In case of field (frame) display, set the sweep magnification
to x40 with respect to X1.
WFM:SWEEP:V_MAG
?
Queries the sweep magnification mode in case of field
(frame) display.
FIELD1
Displays the waveform of field 1.
FIELD2
Displays the waveform of field 2.
WFM:SWEEP:FIELD
?
Queries the selected field.
●
WFM - LINE SELECT
LV 58SER04 (MPEG DECODER)
Command Parameter1
Description
ON
Enables the line select function.
OFF
Disables the line select function.
WFM:LINE_SELECT
?
Queries the line select function.
FIELD1
Sets the selection range of the line select to field 1.
FIELD2
Sets the selection range of the line select to field 2.
FRAME
Sets the selection range of the line select to frame.
WFM:LINE_FIELD
?
Queries the selection range of the line select.
Example)
1 to 1125
(Depending on
the format)
Sets the line of the line select.
WFM:LINE_NUMBER
?
Queries the selected line of the line select.
